Used Cushion Tire Forklift Everett - While forklift trucks are often classified by the type of work they perform under most circumstances, forklift trucks can also be classified by the type of tire they are fitted with. There are two main kinds of tire classification for forklifts, pneumatic and cushion tire.
It is vital to note that there are benefits and drawbacks to both types of forklift tires; cushion and pneumatic. The benefits and potential drawbacks of the cushion tire models can only be compared when the pneumatic benefits and drawbacks are equally discussed.
Forklift Tire Classifications
Cushion Tires
Cushion tires are comprised of treaded or smooth, solid rubber which is positioned around and affixed to a metal ring or baseband. Cushion tires cost less to make and are easier to take care of. Cushion tires are designed for smooth surface applications such as work that takes place mostly indoors or around loading docks. Cushion tires make travelling in tight locations much easier to navigate around corners due to their tight radius. Cushion tires enable the forklift to be situated closer to the ground, increasing the vertical clearance in comparison to other models that rely on pneumatic tires. Pneumatic tires provide better traction compared to cushion tires; especially on wet surfaces and outdoor locations.
Cushion tire forklifts are used for a wide range of applications, including order picking, unloading shipments, organizing inventory, transporting to and from a loading dock and other similar applications.
Pneumatic Tires
Pneumatic tires are mainly utilized on uneven surfaces and rougher terrain. These tires fall into two categories: standard air pneumatic or solid resilient pneumatic.
The main difference with these categories is that the standard air pneumatic tires consist of a layered rubber design filled with air and the solid resilient pneumatic type is made completely out of rubber.
Pneumatic tire forklifts are excellent choices for working in locations with uneven or unpaved ground outdoors. The solid resilient pneumatic forklift tires are best used in areas such as lumber yards or junkyards and construction sites where there may be sharp metal items on the ground which could puncture the tires.
Benefits of Cushion Tire Forklifts
Cushion tire forklifts can be used inside and outside on smooth surfaces. The majority of forklifts that rely on cushion tires are used mostly indoors with limited outdoor use. They are often designed for use in areas such as manufacturing plants and warehouses. Warehousing and narrow aisles and tight locations all rely on the benefits of cushion tire forklifts.
Some benefits of using a cushion tire forklift over a pneumatic tire forklift are:
1) Maneuverability
Since cushion tire forklifts do not need to house a larger internal combustion engine, they are more compact and easier to maneuver.
2) Lower Clearance
Forklifts built for indoor use with cushion tires generally have a lower clearance than pneumatic tire equipment, allowing the forklift to more easily navigate doorways and other obstacles such as lights and sprinkler systems.
3) Durability
With little to no risk of a tire puncture, cushion forklift models are easy to maintain and ultra-durable.
4) Quiet
Because the majority of cushion tire forklifts are powered by battery or fuel cell, instead of an internal combustion engine, they are much less noisy than propane or diesel powered forklifts.
5) Environmentally Friendly
Powered by electricity instead of relying on an internal combustion engine enables cushion tire forklifts to make zero dangerous emissions.
Forklift Tire Choice
The forklift frame typically depicts whether a cushion tire or a pneumatic tire will be utilized. The forklifts’ lifting capacity and frame are specific to the axles and tires in the design. Most forklift manufacturers design forklifts to operate safely with specific wheels and tires, namely cushion tires or pneumatic tires. Instead of trying to modify the forklift by picking the correct tire for a particular application, it is wiser to choose the forklift that will best suit the job at hand.
Workplace Applications
Suitable Work Applications for Cushion Tires
Cushion tire forklifts are usually the best option for many workplace applications. If there is moderate use of the forklift outside on smooth surfaces and the majority of the lifting, loading and transporting will be occurring inside on smooth floors, a cushion tire model is an excellent tool.
Cushion tire forklifts typically feature a smaller frame and sit much lower to the ground compared to pneumatic tire models. This compact design facilitates easier clearance through doorways and overhead obstacle avoidance. Although, cushion tire forklifts offer less ground clearance, this can cause damage to outdoor obstacles when the surface is uneven or unclear. One solution is to outfit traction tires on the front of the cushion tire forklift. Traction style tires will give better traction on rough terrains like asphalt or packed gravel or wet surfaces. However, it is still not recommended to drive on dirt or grass and it must be noted that the same type of tire must be used on the opposite sides, drive and steer axles.
One of the largest advantages of using a forklift with cushion tires is the smaller turning radius. This makes cushion tire forklifts ideal for warehouses and manufacturing facilities that have less space. Locations that rely on narrow aisles will benefit greatly from the smaller cushion tire forklifts and their tight turning capabilities. Pneumatic tire forklifts are more expensive and less available compared to cushion tire forklifts.
Suitable Work Applications for Pneumatic Tire Forklifts
Outdoor applications working on gravel benefit from pneumatic tire forklift models thanks to the air in their tires. Pneumatic tires can also be used inside but do not provide the advantages of low clearance, maneuverability or small turning radius. Pneumatic tire forklifts operate with an internal combustion engine and these harmful emissions are dangerous for use indoors. With a wider base and longer frame in comparison to cushion tire models, pneumatic tire forklifts are for use mainly outdoors.
Of the two types of pneumatic tires, the solid pneumatic tire is more expensive than the air pneumatic tire. The solid pneumatic tire has no air inside and is made from solid rubber. This design makes the tire stronger against punctures or gouges. Outdoor areas including lumber yards and scrap yards that feature copious amounts of metal debris and nails often rely on solid pneumatic tires. Air-filled pneumatic tires work well on gravel and asphalt exterior surfaces. However, air pneumatic tires are susceptible to being punctured or gouged. Because of this, it is necessary to make sure the work area is free of any sharp objects before using forklift fitted with air pneumatic tires at that site. Operator fatigue and discomfort can be traced to the bounciness of air-filled tires. It is possible to foam fill the pneumatic forklift tires for a smoother ride. The foam filling option creates a more even ride compared to the solid pneumatic tires or the bounciness of the air-filled pneumatic tires. Flat tires can be filled with foam to keep them more durable and prevent flats. It takes roughly three days to fill and cure an air pneumatic tire with foam.
Difference in Load Capacity
The load capacity on for pneumatic tire forklifts and cushion tire forklifts are fairly equal. Lift limits are given for certain electric-powered cushion tire forklifts. However, cushion and pneumatic tire forklifts can basically be obtained with just about any load capacity. There are numerous load capacities ranging from less than 2000 pounds to more than 200,000 pounds.
Cushion Tire Forklift PDF
